RF Products in the Frequency Range 950 to 2150 MHz

Photo Name of Product Technical Description Info PDF
DEV 121xx/zz
De-/Multiplexer 		Demultiplexer and Multiplexer, xx:1, 24, 32, 48 or 64 channels, 950MHz...2150MHz, 50Ohm and 75Ohm versions, RS232, Control via Web interface, Ethernet and SNMP, 19“, 3RU
DEV 1218
De-/Multiplexer 		Demultiplexer and Multiplexer 8:1, passive, 950...2150 MHz, 50Ohm and 75Ohm versions, RS232, Ethernet and SNMP, 19“, 1RU
DEV 12116
De-/Multiplexer 		Demultiplexer and Multiplexer 16:1, passive, 950...2150 MHz, 50Ohm and 75Ohm versions, RS232, Ethernet and SNMP, 19“, 1RU
DEV 1248, 12416, 12232
L-Band Multichannel Multiplexer 		Demultiplexer and Multiplexer 4*8:1, 4*16:1 and 2*32:1, for permanent signal monitoring and switching of multiple inputs to one output or to route a signal to different destinations, 950...2150 MHz, 50Ohm and 75Ohm versions, redundant power supplies, Ethernet, Web-Interface, SNMP, 19“, 3RU
DEV 1258
Multiplexer 		Multiplexer 8:1, active, for automatic signal distribution systems to be applied as a redundancy switch, continuous monitoring of RF signals, DC...2,5GHz, 50Ohm and 75Ohm versions, RS232, Ethernet and SNMP, 19“, 1RU
DEV 12516
Multiplexer 		Multiplexer 16:1, active, for automatic signal distribution systems, continuous monitoring of RF signals, 950MHz...2150MHz, 50Ohm and 75Ohm versions, monitoring point, RS232, Ethernet and SNMP, 19“, 1RU
DEV 03-00x2, DEV 13-0xxx
Universal Chassis for passive components 		Two different passive Chassis in 3 RU to be equipped individually with a choice of passive splitter, combiner and diplexer modules with different functionality. Different frequency ranges and impedances available.
DEV 152x/xx
L-Band Sensing Switch 		L-Band DPST Sensing Switch 2:1, 4-16 channel version, 950MHz...2150MHz, 50Ohm and 75Ohm, automatic measuring and switching to the redundancy input when signal below threshold, redundant power supplies from two different primary lines, RS232, Ethernet with SNMP, 19“, 3RU
DEV 1951
Universal Switch Chassis 		Single and Dual Channel Chassis for various switch cards, frequency band and impedance according to configuration of cards ( 15 different cards available - DPST card with monitoring port, ASI redundancy card, SPDT Ultra Broad Band card with SMA- or N-Connectors, DPST Sensing Switch card with measuring of RF signal level and monitoring of preset threshold, Ethernet Redundancy Switch Card, MEIO Interface Cards, etc.), redundant power supplies from two different primary power lines, RS232, Ethernet and SNMP, with built-in Web-Interface, 19“, 1RU,
DEV 1991/n+1 or 4xn+1
Redundancy Switch for CATV-Band 		Redundancy Switch n+1 (from 2+1 to 64+1), single and double version, DC...1000MHz, 50Ohm and 75Ohm, wired ready for connection with MIMIC user interface 8+1 (standard), redundant power supplies from two different primary lines, RS232, Ethernet and SNMP, 19“, 3RU
DEV 1993/n+1 or 4xn+1
Redundancy Switch for L-Band 		Redundancy Switch n+1 (from 2+1 to 64+1), single and double version, DC...2500MHz, Monitoring and Control of motorized antenna as an option, 50Ohm and 75Ohm, wired ready for connection with MIMIC user interface 8+1 (standard), redundant power supplies from two different primary lines, RS232, Ethernet and SNMP, 19“, 3RU
DEV 1995/1996/4x4
Distributing Matrix for CATV and L-Band 		Distributing Matrix, 47MHz...862MHz and 950MHz...2150MHz, 4x4, redundant power supplies from two different primary power lines, RS232, Ethernet and SNMP, built-in Web-Interface, 19“, 1 RU only!
DEV 1995/1996
Distributing Matrix for CATV and L-Band 		Distributing Matrix, 47MHz...862MHz and 950MHz...2150MHz, n:8 or n:m, can be realised up to 256x256, redundant power supplies from two different primary power lines, RS232, Ethernet and SNMP, built-in Web-Interface, 19“, RU according to configuration
DEV 1995/1996 Upgradeable
Software Upgradeable Matrices for CATV and L-Band 		Certain Distributing Matrices of the DEV 1995/1996 series are upgradeable via software. The software activates crosspoints in steps of 8 inputs/outputs within the same form factor. Available for all new DEV matrices ranging from 16x24 to 64x48.
DEV 2180
L-Band Distribution System 		L-Band Distribution System, 950MHz...2150MHz, 50Ohm and 75Ohm versions and combinations 50-75Ohm and 75-50Ohm for integration of multiple Distribution Amplifiers (up to 12 x 1:8 or up to 8 x 1:16) as well as Matrix switches with receiver selectable output ports (4x16 up to 4x60) in a space saving Chassis, bias current monitoring and RF sensing as an option, redundant power supplies from two different primary lines, 19”, 4RU
DEV 2182/2183/2185
L-Band Distribution Amplifier 		L-Band Distribution Amplifier 1:8, 2x 1:8 and 1:16, 950MHz...2150MHz, 50Ohm and 75Ohm versions and combinations 50-75Ohm and 75-50Ohm, with remote alarming function, 0dB monitoring output at the front side, redundant power supplies from two different primary lines, remote alarming function, 19“, 1RU
DEV 2190
Managed L-Band Distribution System 		Managed L-Band Distribution System, 950MHz...2150MHz, 50Ohm and 75Ohm versions and combinations 50-75Ohm and 75-50Ohm for integration of multiple Distribution Amplifiers (up to 16 x 1:8 or up to 8 x 1:16) as well as Matrix Switches with receiver selectable output ports (4x16 (4x) up to 4x64 (1x) ) in a space saving Chassis, bias current monitoring, variable gain as well as RF sensing included as a standard, extended L-Band and tilt as well as optical inputs as an option, redundant power supplies from two different primary lines, Web-Interface, 19”, 4RU
DEV 2208/2216
L-Band Combiner 		L-Band Combiner 8:1 and 16:1, active, 950MHz...2150MHz, 50Ohm and 75Ohm, 0dB monitoring output at the front side, redundant power supplies from two different primary lines, remote alarming function, 19“, 1RU
DEV 225x
L-Band Combiner 		L-Band Combiner 4:1, 8:1, 2x8:1, 16:1, 32:2, passive, 950MHz...2150MHz, 50Ohm and 75Ohm, -20dB monitoring output at the back side, 19“, 1RU
DEV 226x
L-Band Splitter 		L-Band Splitter 1:4, 1:8, 2x 1:8, 1:16, 1:32, passive, 950MHz...2150MHz, 50Ohm and 75Ohm, -20dB monitoring output at the back side, 19“, 1RU
DEV 2644
Divider (Wilkinson) 		Divider, Wilkinson Type, passive, 1:4, 600...2500 MHz, 50Ohm as well as 400MHz...2850MHz, 50 and 75 Ohm
DEV 4111
Universal Transmission Chassis, 1RU 		Chassis for universal transmission tasks, 2 Slots for optical modules in 4HP, TX and/or RX, RF amplifier modules, equipped with 1:8 or 1:16 splitters, matrix switches, 1+1 or amplifier redundancy, L-Band and CATV Band, 50 or 75 ohm, redundant power supplies, SNMP and Web Interface, 19", 1RU
DEV 7113
Intelligent Optribution Chassis, 3RU 		Chassis for optical Signal Transmission with up to 20 optical modules in 4HP, TX and/or RX, for the optical transmission of up to 40 signals, 1+1 or n+1 redundancy switching, CWDM for up to 8 signals, signal recording, variable gain control, L-Band and CATV Band, 50 or 75 Ohm, redundant power supplies, SNMP and Web Interface, 19", 3RU
DEV 7114
Intelligent Optribution Chassis, 4RU 		All-In Chassis with Optical Transmission and RF Signal Distribution, for up to 16 Modules in 4HP, Tx and/or Rx and up to 16 Modules Splitters (1:8 up to 1:128), Matrix Switches (4x16 up to 4x64), 50 or 75 Ohm, control via SNMP or Web Interface, up to 3 redundant power supplies, 19", 4RU
DEV 7143
Optribution Chassis, 3RU 		Chassis for optical Signal Transmission without controller, for up to 20 optical module in 4HP, TX and/or RX, for optical transmission of up to 40 signals, 1+1 TX redundancy, CWDM for up to 8 signals, L-Band and CATV Band, 50 or 75 Ohm, redundant power supplies, 19", 3RU
DEV 7152
Intelligent Optribution Outdoor Chassis, 3RU 		Intelligent Optribution Outdoor Chassis, signal conversion @ the antenna, temperature range -30° to +60° Celsius, standard transmission modules in 4HP, 4+1 redundancy possible, redundant power supplies, fully managed over IP.
DEV 72xx/73xx L-Band
Optical TX and RX Modules L-Band, 4HP 		Variety of optical transmitter and receiver modules in 4HP for L-Band, different functionalities e.g. for advanced CWDM applications, can be integrated in Optribution chassis DEV 7113, DEV 7114, DEV 7143 and DEV 7152 as well as in DEV 4111.
DEV 75xx
Optrical Splitter Modules, 4 HP 		Optical splitter modules with different numbers of optical outputs (2,4,8), can be integrated in all available Optribution chassis.
DEV 76xx
Optical Multiplexer/Demultiplexer Modules, 4HP 		Optical Multiplexer/Demultiplexer Modules in 4HP, with different numbers of optical ports (2,4,8) for advanced CWDM applications, can be integrated in all available Optribution chassis.
DEV 7103
Intelligent Chassis for Optical Transmission, 3RU 		Chassis for optical Signal Transmission with Controller, for up to 16 Modules in 5HP, Tx and/or Rx, 50 or 75 Ohm, 1+1 or n+1 redundancy switching, control via Web Interface, redundant power supplies, 19", 3RU
DEV 7104
Chassis for Optical Transmission and RF Signal Distribution, 4RU 		All-In Chassis with Optical Transmission and RF Signal Distribution, for up to 12 Modules in 5HP, Tx and/or Rx and up to 12 Modules 1:8 Splitters, Matrix Switches also possible, 50 or 75 Ohm, 1+1 or n+1 redundancy switching, control via Web Interface, redundant power supplies, 19", 4RU
DEV 7123
Chassis for Optical Transmission Modules, 3RU 		Chassis for optical Signal Transmission without Controller, for up to 16 Modules in 5HP, Tx and/or Rx, 50 or 75 Ohm, redundant power supplies, 19", 3RU
DEV 721x, 731y
Optical L-Band Transmission Modules, 5HP 		Optical Signal Transmission, Receiver and Transmitter Modules in 5HP to be built in one of the DEV Chassis for optical Signal Transmission in DEV 7103, DEV 7104, DEV 7123 and DEV 4101, L-Band and Extended L-Band, Automatic and Manual Gain Control (AGC and MGC), to bridge distances of up to 60 km.
DEV 8120
Managed LNB Powering System 		Bias Tee for up to 54 channels integrated in a 3 RU Chassis, dual channel modules for high packing density in 50, 75 Ohm and mixed impedances 50/75 available. Extended L-Band, 700...2300 MHz, Bias current monitoring, Web Interface and SNMP, redundant power supplies, 3 RU
DEV 8122/8123
2/4 Channel Bias Tee 		Multichannel L-Band and/or Extended L-Band Controlled Bias Tees, 700MHz...2300MHz, 50Ohm or 75Ohm versions, to feed two or four LNBs by choice. Bias thresholds can be adjusted remotely by the user via serial interface. Rack mountable for professional applications, redundant power supplies from two different primary lines, remote alarming function, 19", 1RU
DEV 8131
Impedance Converters 		Impedance Converter, 950MHz...2150MHz, 50Ohm to 75Ohm and vice versa, Housing 20x18x50mm or 25,4x25,4x38mm
DEV 860x/77
Lightning Protection 		Lightning Protection for 4, 8 or 12 L-Band feeds, compact rack mountable panel, N-Connectors for Inputs and Outputs DC...2150MHz, 50Ohm or 75Ohm, 19", 2RU